Trailer continued…

Trailer continued…

I decided to replace the spoiler on the back of the trailer as the old one had gotten all bent out of shape from the tarp pulling it down at the ends all winter. It is really just a bit of whimsy that Crisp suggested when I built the trailer, but I suspect it may actually help a little with the aerodynamics, and it makes a useful handle. The old one was just flimsy 1/8″ plywood, so I used 3/8″ ply this time to make it a little heftier.

Old spoiler removed and used as template to cut new one, which has been cut and sanded

Held in place with epoxy resin and screws

And a quick coat of primer 🙂


Leave a Reply

Your email address will not be published. Required fields are marked *